SW-IP-24P-10
-
24Port 100/1000 Base-TX | Fully Configured for Netvio JP4 Series
-
Configuration via Netvio360 utility including ‘one touch’ network switch configuration.
-
Supports upto 21 end-point devices (encoders or decoders)
-
3 Ports reserved for IP-JP4-CL-10 connection (2no.) & primary LAN or Router (1no.)
-
450W PoE Capable across all 24 Ports
-
Max PoE per port: 30W (Netvio devices 10W each)
SW-IP-48P-10
-
48Port 100/1000 Base-TX | Fully Configured for Netvio JP4 Series
-
Configuration via Netvio360 utility including ‘one touch’ network switch configuration.
-
Supports upto 45 end-point devices (encoders or decoders)
-
3 Ports reserved for IP-JP4-CL-10 connection (2no.) & primary LAN or Router (1no.)
-
1440W PoE Capable across all 24 Ports
-
Max PoE per port: 30W (Netvio devices 10W each)
General Guidance
Netvio JP4 Series devices will work on most commercially available L2, L2+ or L3 Gigabit Ethernet Switches. There are essential criteria to ensure a successful installation. For ease of use, Netvio had tested a range of popular network switches and prepared specific set-up guides for your convenience.
Multicast
Multicast & Internet Group Management Protocol (IGMP) Version 2 enabled.
IGMP Snooping
IGMP Snooping enabled on all switches and in the AVoIP VLAN. IGMP Snooping Querier enabled on the stack or core switch
Jumbo Frames
Jumbo Frames enabled or increase the MTU size to maximum supported value of 9000+ bytes. Immediate or Fast Leave should be enabled in single switch systems.
